logo

English

이곳의 프로그래밍관련 정보와 소스는 마음대로 활용하셔도 좋습니다. 다만 쓰시기 전에 통보 정도는 해주시는 것이 예의 일것 같습니다. 질문이나 오류 수정은 siseong@gmail.com 으로 주세요. 감사합니다.

How to FFMpeg Windows Build with msys 1.0 and MinGW_64

by lizard2019 posted Jun 05, 2019
?

Shortcut

PrevPrev Article

NextNext Article

Larger Font Smaller Font Up Down Go comment Print Attachment
?

Shortcut

PrevPrev Article

NextNext Article

Larger Font Smaller Font Up Down Go comment Print Attachment

MS-Windows용 FFMPeg 라이브러리와 실행 파일을 빌드하는 방법

Visual Studio를 사용하지 않고 오지 MinGW 64Bit GCC 만을 이용하여 빌드하는 방법을 소개합니다.

여러가지 빌드 방법이 올라와 있지만 오래전 내용이고 설정 내용도 부실하여 잘 안되시는 분들은 아래 방법을 사용하세요.

 

1. MSYS 1.0 과 MinGW 64 bit  설치

아래 링크 파일을 다운로드하여 C:\MinGW 폴더를 만들고 그안에 압축을 풉니다.

http://www.digipine.com/files/MinGW_w64_build_ffmpeg_x264_265.zip

 

* msys 1.0 환경을 개별 설정하기가 매우 어려워서 제가 설정한 첨부파일을 다운로드 하여 압축을 해제하는 것이 새용하기 편할 것 입니다.

 

환경 변수에 PATH에 아래 값을 등록합니다.

C:\MinGW\bin

C:\MinGW\msys\1.0\bin

C:\MinGW\mingw-w64\mingw64\bin

 

PATH가 정확한지 확인 해야 합니다. 틀릴 경우 gcc가 동작하지 않습니다.

 

GCC 설치 확인 : C:\MinGW\msys\1.0에 있는 msys.bat를 실행하면 커맨드 창이 뜨는데 여기에서 gcc라 입력하고 엔터를 치면 다음과 같은 에러 메시지가 나와야 정상적으로 설치 된 것이다.

 

$ gcc
gcc.exe: fatal error: no input files
compilation terminated.

 

msys 에서 빌드 소스가 있는 디렉토리로 이동하려면 

 

cd /c/User/Simon/Source/ffmpeg

와 같이 명령을 주면 됩니다. "/c/" 는 C:\ 드라이브이고 이후부터는 폴더 명을 그대로 사용합니다.

 

빌드를 위한 소스 코드는 각 공식 사이트에서 최신 버전을 직접 받으세요.

링크가 바뀌어는 직접 사이트를 방문하여 받는 것이 필요합니다.

 

2. x264 빌드 

ffmpeg 빌드 전에 아래와 같이 빌드 

./configure --enable-static --host=x86_64-w64-mingw32 --cross-prefix=x86_64-w64-mingw32-
make
make install
 
3. x265 빌드
build/msys 에서 make-x86_64-w64-mingw32-Makefiles.sh 를 실행하여
아래와 같이 설정합니다.
 

x265_cmake.PNG

 

이후 

make
make install

 

4. FFMpeg BuildFFMpeg Build Config

드디어 빌드..  소스 코드는 ffmpeg 공식 사이트에서 받으세요.

./configure --arch=x86_64 --enable-yasm --enable-asm --enable-gpl --enable-version3 --enable-w32threads --extra-cflags='-I/usr/local/include' --extra-ldflags='-L/usr/local/lib' --disable-debug --disable-doc --enable-libx264 --enable-libx265 --prefix=./install --enable-static --pkg-config-flags=--static

make
make install

 

* pkg-config-flags=--static 추가해주어야 링크에러가 발생하지 않는다.

빌드된 파일은 install  폴더 모여 있습니다.

 

* dll 을 빌드하기 위해서는 --enable-static 을 --enable-shared 로 변경하고 빌드하면 됩니다.

 

 

How to build FFMPeg libraries and executables for MS-Windows

This tutorial will show you how to build with Oxy MinGW 64Bit GCC without Visual Studio.

There are many different build methods, but if you have not done so for a long time,

 

1. MSYS 1.0 and MinGW 64 bit Installation

Download the link file below to create the C: \ MinGW folder and unzip it inside.

http://www.digipine.com/files/MinGW_w64_build_ffmpeg_x264_265.zip

 

* It is very difficult to set up an individual msys 1.0 environment, so it would be a good idea to download and unzip the attachments I set up.

 

Register the following value in your PATH for the environment variable:

C:\MinGW\bin

C:\MinGW\msys\1.0\bin

C:\MinGW\mingw-w64\mingw64\bin

 

Make sure your PATH is correct. If not, gcc will not work.

 

Confirm GCC installation: When you run msys.bat in C:\MinGW\msys\1.0, a command window pops up.

 

Enter gcc here and hit Enter. >

 

$ gcc
gcc.exe: fatal error: no input files compilation terminated.

To move to the directory where the build source is located in msys

cd/c/User/Simon/Source/ffmpeg

 

You can give commands like "/c/" Is the C:\ drive and will continue to use the folder name from now on.

 

For the source code for the build, please get the latest version directly from each official site.

If the link changes, you will need to visit the site yourself.

 

2. x264 build ffmpeg Build


./configure --enable-static --host = x86_64-w64-mingw32 --cross-prefix = x86_64-w64-mingw32-
make
make install

3. x265 build

 

Run make -x86_64-w64-mingw32-Makefiles.sh in build / msys
Set it like this:
 

x265_cmake.PNG

 

Since


make
make install

 

4. FFMpeg BuildFFMpeg Build Config

Finally, build ... & nbsp; Get the source code from the ffmpeg official site.


./configure --arch = x86_64 --enable-yasm --enable-asm --enable-gpl --enable-version3 --enable-w32threads --extra-cflags = -disable-debug --disable-doc --enable-libx264 --enable-libx265 --prefix = ./install --enable-static --pkg -config-flags = - static

make
make install

* pkg-config-flags = - static Do not add link errors.

 

The build file is located in the install & nbsp; There are folders.

 

* To build the dll, change --enable-static to --enable-shared and build.

 

 


List of Articles
No. Subject Author Date Views
84 Certbot으로 무료 인증서 발급 받기 digipine 2020.09.03 522
83 MongoDB 설치 및 C 개발 도구 설정 1 digipine 2020.09.03 449
82 mongoose 3.8 싱글 파일 소스 코드 file digipine 2020.09.01 335
81 [iOS] Bluetooth로 App을 백그라운드 모드로 실행는 방법 lizard2019 2020.02.11 3514
80 How to Build FFMpeg for LAVFilters file lizard2019 2019.06.05 1449
» How to FFMpeg Windows Build with msys 1.0 and MinGW_64 file lizard2019 2019.06.05 2208
78 C/C++ struct 패딩(padding) 원리 이해 lizard2019 2019.03.04 2149
77 gcc thread and mutex 사용법 lizard2019 2019.02.27 1198
76 윈도우즈 도스 커멘드(Command) 네트워크 관련 명령어 lizard2019 2019.02.07 1342
75 Ubuntu 우분투 설치 가이드 lizard2019 2019.01.29 780
74 Linux/OSX bash에서 source 명령어 lizard2019 2019.01.07 779
73 Xcode 없이 맥에 '명령어 라인 도구(Command Line Tools)'를 설치하는 방법 엉뚱도마뱀 2018.12.26 2859
72 언어 IDE 별로 git ignore 파일을 자동으로 만들어 주는 사이트 엉뚱도마뱀 2018.12.17 122387
71 [Swift, MacOS] 맥 한글 파일명이 윈도우에서 자소 분리되는 현상 해결, NFD, NFC 엉뚱도마뱀 2018.12.11 20072
70 수학적 구조물 모델링 만들기 소개 비디오 엉뚱도마뱀 2018.09.24 1050
69 Photoshop CC 2018 한글 영문 변환 언어팩, 포토샵 언어변경 file 엉뚱도마뱀 2018.07.04 8525
68 LibVLC 미디어 재생기 프로그래밍 방법 C++, QT 엉뚱도마뱀 2018.04.20 2500
67 select 와 epoll 엉뚱도마뱀 2017.12.11 827
66 비밀번호 해쉬에 Salt(소금) 첨가하기 file 엉뚱도마뱀 2017.11.23 4272
65 Linux /dev/random vs /dev/urandom 삽질 후기 엉뚱도마뱀 2017.11.22 957
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6