logo

English

이곳의 프로그래밍관련 정보와 소스는 마음대로 활용하셔도 좋습니다. 다만 쓰시기 전에 통보 정도는 해주시는 것이 예의 일것 같습니다. 질문이나 오류 수정은 siseong@gmail.com 으로 주세요. 감사합니다.

WIN CE, GPS - NMEA protocol - GPS Virtual Driver

by digipine posted Oct 28, 2017
?

Shortcut

PrevPrev Article

NextNext Article

Larger Font Smaller Font Up Down Go comment Print
?

Shortcut

PrevPrev Article

NextNext Article

Larger Font Smaller Font Up Down Go comment Print


Introduction

This article shows how to use virtual serial (COM) port to read and convert GPS data stream from one format to another allowing older legacy GPS applications to work with the newer GPS receivers.


Background


I have HPC CASIO Cassiopeia A-10 with Windows CE 2.00 that I'm using exclusively for GPS navigation. I'm using TeleType application for WinCE 2.00 with Delorme Tripmate GPS. Recently I upgraded my GPS with Pharos GPS-500 SiRF III and the TeleType application didn't work with it. It turns out that the application is working with an older version of the NMEA protocol than the GPS-500. The application is using NMEA 0183 v2.0 and the GPS-500 NMEA 0183 v2.3.

The application is actually using only two sentences from the NMEA protocol - GGA and RMC:

GGA —Global Positioning System Fixed Data

$GPGGA,161229.487,3723.2475,N,12158.3416,W,1,07,1.0,9.0,M,,,,0000*18
Name Example Units Description
Message ID $GPGGA   GGA protocol header
UTC Time 161229.487   hhmmss.sss
Latitude 3723.2475   ddmm.mmmm
N/S Indicator N   N=north or S=south
Longitude 12158.3416   dddmm.mmmm
E/W Indicator W   E=east or W=west
Position Fix Indicator 1   See Table 1-4
Satellites Used 7   Range 0 to 12
HDOP 1   Horizontal Dilution of Precision
MSL Altitude 9 meters
Units M meters
Geoid Separation   meters
Units M meters
Age of Diff. Corr.   second Null fields when DGPS is not used
Diff. Ref. Station ID 0000
Checksum *18
<CR> <LF>     End of message termination

Note that there are no differences in GGA between NMEA v2.0 and v2.3.

RMC—Recommended Minimum Specific GNSS Data

$GPRMC,161229.487,A,3723.2475,N,12158.3416,W,0.13,309.62,120598,,A*10
Name Example Units Description
Message ID $GPRMC   RMC protocol header
UTC Time 161229.487   hhmmss.sss
Status A   A=data valid or V=data not valid
Latitude 3723.2475   ddmm.mmmm
N/S Indicator N   N=north or S=south
Longitude 12158.3416   dddmm.mmmm
E/W Indicator W   E=east or W=west
Speed Over Ground 0.13 knots
Course Over Ground 309.62 degrees True
Date 120598   ddmmyy
Magnetic Variation   degrees E=east or W=west
Mode A   A=Autonomous, D=DGPS, E= DR (missing in v2.0)
Checksum *10
<CR> <LF>     End of message termination

The last field "Mode" does not exists in NMEA v2.0. In order for my application to work, it needs to translate the RMC from v2.3 (the GPS-500) to v2.0 (the application). In the translation, it needs to remove the last field from the RMC data and made it look like this:

$GPRMC,161229.487,A,3723.2475,N,12158.3416,W,0.13,309.62,120598,*20


Using the code


To build virtual serial (COM) port I used the excellent example provided in the following article DemoDriver.asp. (Big thanks to the author.)

The virtual port serves as a connection between the actual port and the application. In the process of reading the data from the GPS and passing it to the application, the virtual port translates the GPS data format from NMEA 2.3 to NMEA 2.0 for the RMC sentences.

The following code shows the virtual port "read" function:

DWORD COM_Read( DWORD hOpenContext, LPVOID pBuffer, DWORD Count )
{
    if (hOpenContext != OPEN_CONTEXT)
        return 0;

    // read from the actual port 
    DWORD dwBytes = 0;
    ReadFile(hComm, pBuffer, Count, &dwBytes, NULL);

    // convert the data before it's returned
    Convert( pBuffer, dwBytes );

    return dwBytes;
}

The function "Convert" is doing the work of locating and translating the RMC sentences:

 Collapse
char * atoh = "0123456789ABCDEF";

//             "   0    1    2    3    4    5    6    7    8    9 : ; < = > ? @    A    B    C    D    E    F"
BYTE htoa1[] = {0x00,0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80,0x90,0,0,0,0,0,0,0,0xA0,0xB0,0xC0,0xD0,0xE0,0xF0};
BYTE htoa2[] = {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0,0,0,0,0,0,0,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F};

void Convert( LPVOID pBuffer, DWORD Count )
{
    char* pCh = (char*)pBuffer;
    char ch, crc1, crc2; DWORD nCRC; BYTE state = 10;
    for (DWORD i=0;i<Count; i++)
    {
        ch = pCh[i];

        if (ch == '$') 
            state = 11; 
        else
        {
            switch ( state )
            {
            case 11: state = ch == 'G'? 12:10; break;
            case 12: state = ch == 'P'? 13:10; break;
            case 13: state = ch == 'R'? 14:10; break;
            case 14: state = ch == 'M'? 15:10; break;
            case 15: state = ch == 'C'? 16:10; break;
            case 16: state = ch == ','? 20:10; break;

            case 20:     if (ch == 'A') state = 21; break;
            case 21: state = ch == '*'? 22:20; break;
            case 22: 
                    crc1 = ch; state = 23; break;
            case 23: 
                { 
                    crc2 = ch; 

                    // get the crc
                    nCRC = htoa1[crc1 - '0'] + htoa2[crc2 - '0'];

                    // remove the chars we are deleting
                    nCRC -= 'A';
                    nCRC -= ',';

                    // ... ,,A*72\n
                    //          ^ current pos
                    //      ^ write over pos

                    pCh[i-4]='*';
                    pCh[i-3]=atoh[(nCRC & 0xF0) >> 4];
                    pCh[i-2]=atoh[ nCRC & 0x0F ];
                    pCh[i-1]=13;
                    pCh[i-0]=10;

                    state = 10;
                }
                break;
            }
        }
    }
}

The function goes through the input buffer pBuffer and locates any RMC sentences. For each RMC it checks for the string "A*" at the end and removes it. It also calculates and updates the CRC check sum at the end.

To install the virtual port driver we need to copy the driver dll file to \windows folder at the device and add these entries in the registry:

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial6]
"ManagePort"=dword:00000002
"DeviceType"=dword:00000001
"Index"=dword:00000006
"DevConfig"=hex: 10,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00
"Tsp"="Unimodem.dll"
"Order"=dword:00000006
"Prefix"="COM"
"FriendlyName"="GPS Virtual Driver"
"Dll"="GpsVirtualDriver.dll"

"ManagePort" is the port number where the GPS device is connected to. In my case the GPS is connected with PCMCIA card and shows up as COM2 in the device.
"Index" is the virtual serial port COM number. In this example it is COM6.

To deploy the application to the device we need to build a cab file. This is simple INF file that is used to build the cab file:

 Collapse
; sample.inf
;
;==================================================

[Version]
Signature    = "$Windows NT$"
Provider    = "Gps"
CESignature    = "$Windows CE$"

;
; Supports only WinCE 2.00
;
[CEDevice]
VersionMin=2.00
VersionMax=2.00

[CEStrings]
AppName = "Virtual Driver"
InstallDir = %CE2%

[Strings]
reg_path = Drivers\Builtin\Serial6

;==================================================

[DefaultInstall]
CopyFiles    = Dllfiles
Addreg        = Regkeys

;==================================================

[SourceDisksNames]
1 =, "Common Files",, .

[SourceDisksFiles]
GpsVirtualDriver.dll    = 1

;==================================================
; Ouput directories for files & shortcuts

[DestinationDirs]
Dllfiles = 0, %CE2%

[Dllfiles]
GpsVirtualDriver.dll

[Regkeys]
HKLM,%reg_path%,Dll,0x00000000,GpsVirtualDriver.dll
HKLM,%reg_path%,Prefix,0x00000000,COM
HKLM,%reg_path%,FriendlyName,0x00000000,GPS Virtual Driver
HKLM,%reg_path%,Index,0x00010001,6
HKLM,%reg_path%,Order,0x00010001,2
HKLM,%reg_path%,ManagePort,0x00010001,2
HKLM,%reg_path%,DeviceType,0x00010001,1
HKLM,%reg_path%,Tsp,0x00000000,Unimodem.dll
HKLM,%reg_path%,DevConfig,0x00000001,10,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00

After the cab file is installed a soft reset is required for the driver to start working.


Points of Interest


Doing this small project was full of fun and I learned how to build simple device drivers for Windows CE 2.00. Now I have my Cassiopeia running the TeleType GPS application with the new GPS-500 receiver. The GPS-500 is very compact and it works out of my PCMCIA extension slot from where it gets its power and doesn't require batteries and/or bulky cables. It also gives me the opportunity to continue using my old and brave Cassiopeia A-10 for GPS navigation.


References


TeleType GPS FAQ: http://www.teletype.com/pages/support/faq.html
NMEA Reference Manual: http://www.sparkfun.com/datasheets/GPS/NMEA Reference Manual1.pdf

 
TAG •

List of Articles
No. Subject Author Date Views
24 [iOS] Bluetooth로 App을 백그라운드 모드로 실행는 방법 lizard2019 2020.02.11 3514
23 mongoose 3.8 싱글 파일 소스 코드 file digipine 2020.09.01 335
22 MongoDB 설치 및 C 개발 도구 설정 1 digipine 2020.09.03 449
21 Certbot으로 무료 인증서 발급 받기 digipine 2020.09.03 522
20 Let's Encrypt SSL 인증서 자동 갱신 설정 방법 digipine 2020.09.03 738
19 우분투 18.04 MongoDB 설치 및 구성 lizard2019 2021.02.26 501
18 Ubuntu 18.04 에서 vsftpd 설치하기 lizard2019 2021.03.02 373
17 Docker에서 Phabricator 최신버전 설치 및 버전 확인 방법 file lizard2019 2021.04.15 1400
16 Docker Compute Engine Ubuntu에서 Docker 설치 방법 lizard2019 2021.04.15 463
15 Docker 모든 컨테이너를 Stop 또는 Remove 하는 방법 digipine 2021.09.01 202
14 AWS EC2 Ubuntu 용 Docker 설치 스크립트 digipine 2021.09.01 345
13 Golang Channel 사용법 정리 digipine 2021.10.22 414
12 VSCode 에서 한글 특수문자 부분 만 검색하기 file digipine 2021.10.25 671
11 Remove all .git files, recursively digipine 2021.11.26 366
10 Phabricator Ubuntu Installation Guide digipine 2022.01.26 440
9 MAC Screen Sharing을 위한 VNC 접속을 위한 Port 변경 방법 digipine 2022.09.05 381
8 XCode 사용시 git ignore 로 xcuserstate 충돌 해결하기, .gitignore에 등록했는데도 동작안할때 해결방법 lizard2019 2022.09.25 428
7 xcode xib encountered an error communicating with ibagent-ios 해결 digipine 2022.10.06 382
6 OBS Studio for Http Interface EXE lizard2019 2023.02.15 247
5 FFServer RTSP Audio Server Config digipine 2023.05.12 224
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6