logo

English

이곳의 프로그래밍관련 정보와 소스는 마음대로 활용하셔도 좋습니다. 다만 쓰시기 전에 통보 정도는 해주시는 것이 예의 일것 같습니다. 질문이나 오류 수정은 siseong@gmail.com 으로 주세요. 감사합니다.

WIN CE, GPS - NMEA protocol - GPS Virtual Driver

by digipine posted Oct 28, 2017
?

Shortcut

PrevPrev Article

NextNext Article

Larger Font Smaller Font Up Down Go comment Print
?

Shortcut

PrevPrev Article

NextNext Article

Larger Font Smaller Font Up Down Go comment Print


Introduction

This article shows how to use virtual serial (COM) port to read and convert GPS data stream from one format to another allowing older legacy GPS applications to work with the newer GPS receivers.


Background


I have HPC CASIO Cassiopeia A-10 with Windows CE 2.00 that I'm using exclusively for GPS navigation. I'm using TeleType application for WinCE 2.00 with Delorme Tripmate GPS. Recently I upgraded my GPS with Pharos GPS-500 SiRF III and the TeleType application didn't work with it. It turns out that the application is working with an older version of the NMEA protocol than the GPS-500. The application is using NMEA 0183 v2.0 and the GPS-500 NMEA 0183 v2.3.

The application is actually using only two sentences from the NMEA protocol - GGA and RMC:

GGA —Global Positioning System Fixed Data

$GPGGA,161229.487,3723.2475,N,12158.3416,W,1,07,1.0,9.0,M,,,,0000*18
Name Example Units Description
Message ID $GPGGA   GGA protocol header
UTC Time 161229.487   hhmmss.sss
Latitude 3723.2475   ddmm.mmmm
N/S Indicator N   N=north or S=south
Longitude 12158.3416   dddmm.mmmm
E/W Indicator W   E=east or W=west
Position Fix Indicator 1   See Table 1-4
Satellites Used 7   Range 0 to 12
HDOP 1   Horizontal Dilution of Precision
MSL Altitude 9 meters
Units M meters
Geoid Separation   meters
Units M meters
Age of Diff. Corr.   second Null fields when DGPS is not used
Diff. Ref. Station ID 0000
Checksum *18
<CR> <LF>     End of message termination

Note that there are no differences in GGA between NMEA v2.0 and v2.3.

RMC—Recommended Minimum Specific GNSS Data

$GPRMC,161229.487,A,3723.2475,N,12158.3416,W,0.13,309.62,120598,,A*10
Name Example Units Description
Message ID $GPRMC   RMC protocol header
UTC Time 161229.487   hhmmss.sss
Status A   A=data valid or V=data not valid
Latitude 3723.2475   ddmm.mmmm
N/S Indicator N   N=north or S=south
Longitude 12158.3416   dddmm.mmmm
E/W Indicator W   E=east or W=west
Speed Over Ground 0.13 knots
Course Over Ground 309.62 degrees True
Date 120598   ddmmyy
Magnetic Variation   degrees E=east or W=west
Mode A   A=Autonomous, D=DGPS, E= DR (missing in v2.0)
Checksum *10
<CR> <LF>     End of message termination

The last field "Mode" does not exists in NMEA v2.0. In order for my application to work, it needs to translate the RMC from v2.3 (the GPS-500) to v2.0 (the application). In the translation, it needs to remove the last field from the RMC data and made it look like this:

$GPRMC,161229.487,A,3723.2475,N,12158.3416,W,0.13,309.62,120598,*20


Using the code


To build virtual serial (COM) port I used the excellent example provided in the following article DemoDriver.asp. (Big thanks to the author.)

The virtual port serves as a connection between the actual port and the application. In the process of reading the data from the GPS and passing it to the application, the virtual port translates the GPS data format from NMEA 2.3 to NMEA 2.0 for the RMC sentences.

The following code shows the virtual port "read" function:

DWORD COM_Read( DWORD hOpenContext, LPVOID pBuffer, DWORD Count )
{
    if (hOpenContext != OPEN_CONTEXT)
        return 0;

    // read from the actual port 
    DWORD dwBytes = 0;
    ReadFile(hComm, pBuffer, Count, &dwBytes, NULL);

    // convert the data before it's returned
    Convert( pBuffer, dwBytes );

    return dwBytes;
}

The function "Convert" is doing the work of locating and translating the RMC sentences:

 Collapse
char * atoh = "0123456789ABCDEF";

//             "   0    1    2    3    4    5    6    7    8    9 : ; < = > ? @    A    B    C    D    E    F"
BYTE htoa1[] = {0x00,0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80,0x90,0,0,0,0,0,0,0,0xA0,0xB0,0xC0,0xD0,0xE0,0xF0};
BYTE htoa2[] = {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0,0,0,0,0,0,0,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F};

void Convert( LPVOID pBuffer, DWORD Count )
{
    char* pCh = (char*)pBuffer;
    char ch, crc1, crc2; DWORD nCRC; BYTE state = 10;
    for (DWORD i=0;i<Count; i++)
    {
        ch = pCh[i];

        if (ch == '$') 
            state = 11; 
        else
        {
            switch ( state )
            {
            case 11: state = ch == 'G'? 12:10; break;
            case 12: state = ch == 'P'? 13:10; break;
            case 13: state = ch == 'R'? 14:10; break;
            case 14: state = ch == 'M'? 15:10; break;
            case 15: state = ch == 'C'? 16:10; break;
            case 16: state = ch == ','? 20:10; break;

            case 20:     if (ch == 'A') state = 21; break;
            case 21: state = ch == '*'? 22:20; break;
            case 22: 
                    crc1 = ch; state = 23; break;
            case 23: 
                { 
                    crc2 = ch; 

                    // get the crc
                    nCRC = htoa1[crc1 - '0'] + htoa2[crc2 - '0'];

                    // remove the chars we are deleting
                    nCRC -= 'A';
                    nCRC -= ',';

                    // ... ,,A*72\n
                    //          ^ current pos
                    //      ^ write over pos

                    pCh[i-4]='*';
                    pCh[i-3]=atoh[(nCRC & 0xF0) >> 4];
                    pCh[i-2]=atoh[ nCRC & 0x0F ];
                    pCh[i-1]=13;
                    pCh[i-0]=10;

                    state = 10;
                }
                break;
            }
        }
    }
}

The function goes through the input buffer pBuffer and locates any RMC sentences. For each RMC it checks for the string "A*" at the end and removes it. It also calculates and updates the CRC check sum at the end.

To install the virtual port driver we need to copy the driver dll file to \windows folder at the device and add these entries in the registry:

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial6]
"ManagePort"=dword:00000002
"DeviceType"=dword:00000001
"Index"=dword:00000006
"DevConfig"=hex: 10,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00
"Tsp"="Unimodem.dll"
"Order"=dword:00000006
"Prefix"="COM"
"FriendlyName"="GPS Virtual Driver"
"Dll"="GpsVirtualDriver.dll"

"ManagePort" is the port number where the GPS device is connected to. In my case the GPS is connected with PCMCIA card and shows up as COM2 in the device.
"Index" is the virtual serial port COM number. In this example it is COM6.

To deploy the application to the device we need to build a cab file. This is simple INF file that is used to build the cab file:

 Collapse
; sample.inf
;
;==================================================

[Version]
Signature    = "$Windows NT$"
Provider    = "Gps"
CESignature    = "$Windows CE$"

;
; Supports only WinCE 2.00
;
[CEDevice]
VersionMin=2.00
VersionMax=2.00

[CEStrings]
AppName = "Virtual Driver"
InstallDir = %CE2%

[Strings]
reg_path = Drivers\Builtin\Serial6

;==================================================

[DefaultInstall]
CopyFiles    = Dllfiles
Addreg        = Regkeys

;==================================================

[SourceDisksNames]
1 =, "Common Files",, .

[SourceDisksFiles]
GpsVirtualDriver.dll    = 1

;==================================================
; Ouput directories for files & shortcuts

[DestinationDirs]
Dllfiles = 0, %CE2%

[Dllfiles]
GpsVirtualDriver.dll

[Regkeys]
HKLM,%reg_path%,Dll,0x00000000,GpsVirtualDriver.dll
HKLM,%reg_path%,Prefix,0x00000000,COM
HKLM,%reg_path%,FriendlyName,0x00000000,GPS Virtual Driver
HKLM,%reg_path%,Index,0x00010001,6
HKLM,%reg_path%,Order,0x00010001,2
HKLM,%reg_path%,ManagePort,0x00010001,2
HKLM,%reg_path%,DeviceType,0x00010001,1
HKLM,%reg_path%,Tsp,0x00000000,Unimodem.dll
HKLM,%reg_path%,DevConfig,0x00000001,10,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00

After the cab file is installed a soft reset is required for the driver to start working.


Points of Interest


Doing this small project was full of fun and I learned how to build simple device drivers for Windows CE 2.00. Now I have my Cassiopeia running the TeleType GPS application with the new GPS-500 receiver. The GPS-500 is very compact and it works out of my PCMCIA extension slot from where it gets its power and doesn't require batteries and/or bulky cables. It also gives me the opportunity to continue using my old and brave Cassiopeia A-10 for GPS navigation.


References


TeleType GPS FAQ: http://www.teletype.com/pages/support/faq.html
NMEA Reference Manual: http://www.sparkfun.com/datasheets/GPS/NMEA Reference Manual1.pdf

 
TAG •

List of Articles
No. Subject Author Date Views
33 Linux Kernel 컴파일 및 Patch 방법 digipine 2017.11.02 1479
32 XOR Encryption : 단순하면서도 강력한 암호/복호화 기법 digipine 2017.11.02 2028
31 Phabricator 설치 가이드 우분투 12.04 기준 digipine 2017.11.02 1723
30 Ubuntu Git - Latest Version Install digipine 2017.11.02 712
29 [ubuntu, 우분투] sendmail 설치 digipine 2017.11.02 2686
28 JDK Install ubuntu digipine 2017.11.02 693
27 Git 서버 구축 - 우분투[Ubuntu] digipine 2017.11.02 645
26 임베디드SW 개발자센터 이용안내(성남시 분당구, 개발공간 무료제공) digipine 2017.11.02 851
25 ATmega8 MCU 간의 TWI 기능을 이용한 I2C 통신 digipine 2017.11.02 6511
24 Mac Address 를 String 으로 변환하는 간편한 방법 digipine 2017.11.02 798
23 What is Android Repo? and Manual, Download file digipine 2017.11.02 100765
22 Compile FFmpeg on Ubuntu, Debian, or Mint digipine 2017.11.02 636
21 Wi-Fi display (miracast) FFMpeg MpegTs Supported digipine 2017.11.02 1851
20 Iconv 사용법 소스 digipine 2017.11.01 1631
19 WPA_SUPPLICANT 빌드 방법 digipine 2017.11.01 815
18 WPA_SUPPLICANT 빌드 방법 digipine 2017.11.01 607
17 OpenAL 사용법 정리 1 digipine 2017.11.01 3733
16 QCAD 1.1 한국 최초의 2D CAD 소프트웨어 file digipine 2017.11.01 1174
15 Ubuntu Server OS 한국어 모드로 설치 후 서버 콘솔에서 한글 깨짐 해결 방법 digipine 2017.10.31 2553
14 Linux(리눅스) 파일 시스템 정리 (ext, ext2, ext3, ext4) digipine 2017.10.29 1341
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6